7/8" Break-Away Directional Drill Swivels
Condux International

7/8" Break-Away Directional Drill Swivel 700 lbs.

SKU
CDX08021070
$244.71

Note: D. Drill Swivels come with a 90 day limited warranty.

*WARNING: This swivel is to be used while Directional Drilling only. Severe personal injury could result if used with rope or with steel winch lines in cable pulling operations.

Avoid over stressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use "weak link" pipe sections or wire when using the 7/8" Condux Break-Away Swivel.

This swivel is available to accommodate various pulling needs.? Break loads range from 150 lbs. (667N) - 1,800 lbs (8,006N) and are designed to separate at ?10% of their rated break load.? Order replacement pins as needed.

Note: D. Drill Swivels come with a 90 day limited warranty.

*WARNING: This swivel is to be used while Directional Drilling only. Severe personal injury could result if used with rope or with steel winch lines in cable pulling operations.

More Information
SKUCDX08021070
Short Description

Note: D. Drill Swivels come with a 90 day limited warranty.

*WARNING: This swivel is to be used while Directional Drilling only. Severe personal injury could result if used with rope or with steel winch lines in cable pulling operations.

ManufacturerCondux International
Length in [Imperial]4.83
Length mm [Metric]122
Diameter in [Imperial]0.875
Diameter mm [Metric]22
Slot Width in [Imperial]0.38
Slot Width mm [Metric]9
Entire Slot Depth in [Imperial]1.03
Entire Slot Depth mm [Metric]26
Pin Center in [Imperial].53
Pin Center mm [Metric]13
Pin Diameter in [Imperial].31
Pin Diameter mm [Metric]8
Break Load lb [Imperial]700
Break Load Newton [Metric]3114
Replacement Break Pin08076005
Replacement Part08081065, 7/8" Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel
Mfg. SKU08021070
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account