1-1/4" and 1-3/8" Break Away Directional Drill Swivel
Condux International

1-1/4" Break-Away D.Drill Swivel 1200 lb

SKU
CDX08021500
$256.73

*** Call us for bulk quantity pricing! ***

1-866-326-6782

Avoid overstressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between reamer and pulling eye. No need to use "weak link" pipe sections or wire when using a Condux Break-Away Swivel.

Theses swivels are available to accommodate various pulling needs.  Break loads range from 1,200 lbs. - 25,000 lbs. and separate at ±10% of their rated break load. Order replacement pins as needed.

NOTE: D. Drill Swivels come with a 90 day limited warranty.

WARNING: These swivels are to be used for directional drilling only.  Severe personal injury could result if used with rope or steel winch lines in cable pulling applications.

More Information
SKUCDX08021500
Short Description

*** Call us for bulk quantity pricing! ***

1-866-326-6782

ManufacturerCondux International
Length in [Imperial]5.44
Length mm [Metric]138
Diameter in [Imperial]1.25
Diameter mm [Metric]32
Slot Width in [Imperial].56
Slot Width mm [Metric]14
Entire Slot Depth in [Imperial]1.34
Entire Slot Depth mm [Metric]34
Pin Center in [Imperial].59
Pin Center mm [Metric]15
Pin Diameter in [Imperial].37
Pin Diameter mm [Metric]9
Break Load lb [Imperial]1,200
Break Load Newton [Metric]5338
Compatible Swivel Grease08190007, Directional Drilling Grease
Replacement Break Pin08021505
Replacement Part08081042, 1-1/4" Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel
Mfg. SKU08021500
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account