The 400CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine
- Features a heavy-duty moisture separator with manual drain for removal of trapped moisture and condensed oil
- Completely self-contained and packaged in a construction skid with a lifting bail and expanded metal heat exchanger guard
- Boss outlet fitting (Boss 28) and inlet fittings (1-1/2 in. Pipe) are standard
- DC fan motor is run from the compressor battery and automatically starts when the system is pressurized
- 13-foot power cord with alligator clips to connect to the compressor starting battery
- Optional 1-micron coalescing filter available
- Adaptable stand-alone or tongue-mount design
- Compact installation does not interfere with vehicle tailgates, etc.
- Cools air to within 20° of ambient temperature to optimize moisture removal
- Available in either 12 or 24 volt versions
SPECIFICATIONS:
Length: 24 in. (610 mm)
Width: 44 in. (1118 mm)
Height: 30 in. (762 mm)
Weight: 170 lbs. (77 kg)
Fan Power Requirments 9 A, 24 VDCÂ
Max Working Pressure 200 psi (13.9 bar)
Max Air Compressor Flow Rate 400 cfm (11 M³/Min)
Air Hose Connections Output: Boss 28
Input: 1-1/2 in. Pipe
Note:
The aftercooler™s fan voltage must be selected to match the compressor™s battery voltage.
The following chart shows some compressor manufacturers and the corresponding typical battery voltages:
24 volt-Doosan/Ingersoll Rand
Please confirm the compressor™s battery voltage in your specific application before ordering the aftercooler.
Cable Diameter Range [in]:
0.142, 0.150, 0.177
Cable Diameter Range [mm]:
3.6, 3.8, 4.5
Maximum Pressure bar:
13.9
Maximum Pressure [PSI]:
200
Shipping Method:
LTL
Unit of Measure:
EA.
Weight [lb]:
170.000000
Weight [lb]:
170
Width [in]:
31
