Maxcell 3" 3 Cell Detectable Maxcell Edge Innerduct

No reviews yet Write a Review
SKU:
COMMAXCELLE33DET
$0.00

This product is unpurchasable, but can be added to quote.

Detectable MaxCell was created to answer applications requiring locatabe paths. It has an imbedded 18 gauge solid copper wire suitable for direct wired toning equipment as well as above ground handheld locators. Other historic detection products required additional installation or were separate installation of an additional pull tape - that was often used and therefore lost during subsequent expansion installations. The 18 gauge solid copper wire is imbedded in the product types and permanent to the network once installed. All product types are available in detectable versions.

Features & Advantages:

  • Reliable method for locating cables deployed in buried conduit
  • Detectable with any industry standard toning equipment
  • The wire is inserted into the edge of MaxCell, not in the cable pathways and provides the following advantages over separate/free-floating wires of detectable pull tapes:
    - Permanent: Will not be removed once installed, as is the case with a detectable pull tape
    - Protected: Avoids damage to the wire during cable installation as commonly occurs over separate/free-floating wires or detectable pull tapes
    - Easy installation
  • As an imbedded feature, detectable MaxCell:
    - Requires no additional pull tapes for installation
    - Will not entangle or impede cable installations, nor increase pulling tensions or friction on cables during installation.

No special installation techniques are required beyond standard MaxCell procedures, and the wire does not adversely affect pulling tensions or the flexible nature of MaxCell.

Wire Data:

  • 18G TFN Solid Copper Core
  • 78 mils (nominal OD)
  • Green
  • 600C Max Voltage
  • 15 mils Vinyl insulation
  • 6 Amp
Height [in]:
10
Length [in]:
10
Width [in]:
10
Shipping Method:
LTL
Unit of Measure:
FT.
Weight [lb]:
0.100000