1¼" Blank Plug w/ Rope Tie and Loop Nut

No reviews yet Write a Review
SKU:
CA5120-12
$5.66

Trusted by contractors world-wide to secure their conduit systems from the costly and often damaging incursion of water sedimentation and nesting animals, these high quality plugs are manufactured from a trio of hi-impact chemically inert resins that will also confine volatile and hazardous vapors to their source.

The Kwikie plug functions by compressing a thermo-plastic elastomer seal between two U.V., ozone and chemically resistant compression plates through the hand-tightening of a loop or wing nut; the compressed seal expanding into full contact with the inside pipe walls thereby providing an effective, permanent, positive seal to your conduit system in seconds. Once in place the Kwikie plug will not move until you decide to remove it.

All Kwikie plugs that are designed for conduit pipe larger than two inches are hollow-stemmed and may be used for feeding or bleeding fluids from your lines (½" hose thread adapter available). Other options include wing nuts or eye nuts for tightening the compression plates, flush-fit vs. inside-fit (the outside compression plate on flush-fit Kwikies will not enter the conduit) and schedule 40 and schedule 80 sizing. All Kwikie plugs come with a ½" rope tie for sealing and securing excess rope within the conduit system for future use.

Cable Diameter Range [in]:
0.157-1.125
Cable Diameter Range [mm]:
4.0-28.6
Duct Range Inside Diameter [in]:
1.156 - 1.510
Duct Range Inside Diameter [mm]:
29.36 - 38.35
Height [in]:
10
Length [in]:
10
Width [in]:
10
Nominal Size [in]:
1.25
Nominal Size [mm]:
32
Shipping Method:
Parcel
Unit of Measure:
EA.
Units Per Package:
50
Weight [lb]:
0.080000