V-Groove
AFL

Fujikura 19S Fusion Splicer Kit w/ Cleaver, Battery and Cord

SKU
AFLS015681
$7,325.00

The Fujikura 19S is a low cost, fixed v-groove single fiber splicer with similar features found on the Fujikura 70S. Incorporating the proven ruggedized features pioneered by Fujikura, the 19S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable "auto open sheath clamps" open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated "clamshell design" tube heater applies heat to both sides of the splice protection sleeve resulting in a faster shrink time. Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

The Fujikura 19S is a low cost, fixed v-groove single fiber splicer with similar features found on the Fujikura 70S. Incorporating the proven ruggedized features pioneered by Fujikura, the 19S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable "auto open sheath clamps" open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated "clamshell design" tube heater applies heat to both sides of the splice protection sleeve resulting in a faster shrink time. Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

CLICK BELOW TO DOWNLOAD PRODUCT SPEC SHEET
Fujikura 19S Fusion Splicer

  • Automated and programmable wind protector
  • Fully ruggedized for shock, dust and moisture
  • Li-ion battery with 180 splice/heat cycles per charge
  • 5 mm cleave length for splice on connector or small package needs
  • Sheath clamp or fiber holder operation
  • On-board training and support videos
  • Internet software upgrades
  • Multi-function transit case with integrated workstation

The S015681 19S Single Fusion Splicer Kit Includes:

  • 19S V-Groove Single Fusion Splicer Machine
  • BTR-09 Battery
  • DCC-18 Battery Charge Cord
  • CT30A Cleaver
  • ADC-18 AC Adapter
  • ACC-14 AC Cord
  • ELCT2-20A Spare Electrodes (pair)
  • S70C Sheath Clamp
  • USB Cable
  • Alcohol Dispenser
  • Screw Driver
  • Splicer Carrying Strap
  • Quick Reference Guide
  • Video Instruction Manual
  • CC30 Transit Case with Carrying Strap
More Information
SKUAFLS015681
Short Description

The Fujikura 19S is a low cost, fixed v-groove single fiber splicer with similar features found on the Fujikura 70S. Incorporating the proven ruggedized features pioneered by Fujikura, the 19S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable "auto open sheath clamps" open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated "clamshell design" tube heater applies heat to both sides of the splice protection sleeve resulting in a faster shrink time. Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

ManufacturerAFL
Manufacturer Part NumberS015681
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account