1-1/4" 4000 lb. 821 Champion Swivel
Condux Ball Bearing Swivels are designed to the highest
specifications for underground and overhead pulling applications. All
swivels are tested and inspected to ISO 9001:2000 quality standards.
This ensures that the customer is getting the most reliable, and safest
swivel on the market.
All swivels are precision machined from high grade stainless steel. Clevis pins are heat treated to prevent pin damage when using steel shackles. Each swivel is manufactured with three angular contact, or deep groove, ball bearings which allow the swivel to rotate beyond its rated load. Most manufacturers use only one bearing to handle the load, causing the swivels to stop rotating before it reaches the recommended workload.
Swivels are designed to pass through a sheave but may not be pulled around a bullwheel or capstan.
|Short Description||Condux Ball Bearing Swivels are designed to the highest specifications for underground and overhead pulling applications. All swi ...|
|Length in [Imperial]||4.52|
|Length mm [Metric]||115|
|Diameter in [Imperial]||1.25|
|Diameter mm [Metric]||32|
|Entire Slot Depth in [Imperial]||1.22|
|Entire Slot Depth mm [Metric]||31|
|Pin Center in [Imperial]||.44|
|Pin Center mm [Metric]||11|
|Pin Diameter in [Imperial]||.38|
|Pin Diameter mm [Metric]||10|
|Slot Width in [Imperial]||.59|
|Slot Width mm [Metric]||15|
|Slot Depth in [Imperial]||.410|
|Slot Depth mm [Metric]||10|
|Aerial Working Load lb [Imperial]||2400|
|Aerial Working Load Newton [Metric]||10675|
|Underground Working Load lb [Imperial]||4000|
|Underground Working Load Newton [Metric]||17792|