Cable Pulling Accessories

Sub Categories

Multiple Pulling Harness

Condux International Multiple Cable/Duct Pulling Harnesses allow staggered attachment to cable or innerduct when pulling through conduit systems or during directional drilling pull-back operations. Other harness combinations available upon request. Contact factory for details.

Swing Link

Often called a "sister hook" or "figure-8 link," the Condux Swing Link allows you to swiflty join two looped ends of pull line together without sacrificing the necessary working loads for the pull.

Rope Clevis Links

Rated to 10,000 lb. loads, these rope attachments provide a strong and efficient means of joining the rope directly to the swivel clevis, another rope eye or the eye of the pulling grip.

Load Rated Screw Pin Anchor Shackle

Load rated anchor shackles provide a low cost, economical means of connecting two products together. Often referred to as slings, the ultimate load of the shackles is 6 times Safe Working Load.

Quick Link

Offer a quick and easy way to connect pulling eyes or swivels to winch lines, harnesses or rope. To close, simply screw the nut onto the threaded end. Connectors are reusable.

Chain Link Connector

The Chain Link Connectors are useful and easy to insert in any pulling line. They allow easier bending of a Pulling Eye or other rigid component when going around bends or sheaves. These high quality products are manufactured with Grade 80 steel. Safety Factor is 3:1.

Eye to Eye Connector

Eye to Eye Connectors are the standard Chain Swivel used in many applications. The two halves will not rotate under load, but are useful for aligning products. They are forged from carbon steel and galvanized for protection. Ultimate load is 5 times Safe Working Load.