Mini Corner Cable Guide
This versatile Mini Corner Cable Guide can be used to guide rope, pull tape and steel winch lines through manhole vault openings, pull boxes and handholes. It has a 10,000 LB. cable tension load capacity, and a variety of mounting options.
Cable Feeding Sheaves
The Jamb Skid is a a device for supporting sheaves or quadrant blocks inside a manhole to pull cable into the underground conduit.
By positioning the top of the jamb skid against the underside of the manhole opening and using the camlock foot pedal, set up can be done in fraction of the time it takes to install a hanging sheave assembly. Constructed of solid aluminum, the Jamb Skid is both strong and lightweight.
Pulling tension actually increases the stability of the Jamb Skid during the pull, and you will significantly reduce the risk of breaking chains or straps. The Jamb Skid is especially useful when there are no pulling irons, or when the existing irons do not line up properly with the duct. The Jamb Skid can be placed anywhere within a 360 degree radius inside the manhole.
Order base section and choice of extension separately for a complete Jamb Skid unit. Locking pins are included with the base section.
Hooked Hanger Sheave
Tie off in the manhole to guide cable into the duct. Also used with alignment arm for cable removal. Hinged yoke for easy cable installation and removal. These Hooked Hanger Sheaves are available in 4,000 lb., 10,000 lb. and 12,000 lb. cable tension load capacity. Alignment arm and rigging chains are sold separately. Replacement sheaves are available.
3 Sheave Cable Guide
Heavy Duty Quadrant Block
Corner Cable Guide
Replacement Sheave Assemblies
Flexible Cable Guide w/ Aluminum Adapter
Cable feeds through the Bell Adapter and exits through the Duct Adapter which fits into the duct. Bell Adapter and Duct Adapter included for specific duct and guide size ordered. Other lengths available upon request.
Close Clearance Flexible Cable Guides and Extensions
For guiding cable from the reel into the duct. The cable feeds through the Bell Adapter and exits through the Duct Adapter which fits into the duct. Other lengths are available upon request.
Duct adapters are to be ordered separately.
Alloy and Steel Duct Adapters and Bells
All duct and bell adapters for the Flexible Cable Guides and the Close Clearance Flexible Cable Guides can be found here.
The Aluminum Flexible Cable Guide Adapters and Bells are sold as replacements.
The Steel Duct Adapters for the Close Clearance Flexible Cable Guides are sold separately from the Guides.
Lubricant Adapter Plates for Flex Guides
Lube adapter plates may be used either at the bell end or the duct adapter end. Simply remove the bell or adapter end and insert the lube adapter plate. Then use the supplied longer bolts to attach the lube adapter plate to the bell or duct adapter.
Fiber Optic Jamb Skid
Fiber Optic Quadrant Block
Fiber Optic Sheave Mount Packages
Fiber Optic Hanger Block
Underground Fiber Optic Cable Sheave
Chain, Double Hook, Alloy Links
Split Entry Bell
Nylon Cable Protector
Cable Bending Shoe
Light Base Sheave
The light base sheave fits on top of the light pole base. The bolt pattern will fit most light base bolt patterns.
- Used to protect cable from damage when pulling slack
- Powder coated base made of steel with 5" aluminum sheave
Items 1-24 of 222