105 Kestrel Drive Collegeville, PA 19426

Phone: 1-866-326-6782 / Fax: (610) 831-5012

Plowing and Trenching

Vibratory Plowing Pull Blades
Vibratory Plowing Pull Blades

Choose from a wide array of vibratory plow blade types and options for cable and pipe pulling that we offer for the following plow manufacturers:

  • Burkeen
  • Case/Astec/Toro
  • Turfco and Kaercher
  • Ditch Witch
  • Vermeer
Chute Blades
Chute Blades

Here you will find many options to configure a custom Chute Blade for your vibratory plow. You can select your average plow or cover depth, width of blade, reamer tip, chute width and radius. Chute blades are available for various plow models from the following manufacturers:

  • Burkeen
  • Case/Astec/Toro
  • Ditch Witch
  • Vermeer
Lost Motion Assemblies for Product Pullback Attachment
Lost Motion Assemblies for Product Pullback Attachment

Lost Motion Assemblies provide an easy and positive connection between Triple D plowing blades and various pipe and cable pulling devices. They also extend the life expectancy of pulling devices by isolating them from the reciprocating motion of the plowing blade.

These assemblies are designed to work with Triple D B-150 Blade Bushings which are standard on most blades.

Turf Hammer Tamping Attachment
Turf Hammer Tamping Attachment
The Turf Hammer Vibratory Plow Attachment converts your plow into an efficient and economical tamper within seconds.
Replacement Leading Edges for Plow Blades
Replacement Leading Edges for Plow Blades

These "Leading Edges" are machined to a very sharp cutting edge from high quality tool steel bar stock that is quenched and tempered for strength and durability. They are available in either a serrated or straight cutting edge, and are available in thicknesses of 1/2", 5/8", 3/4" and 1".

We are offering both styles of leading edges as replacement parts; and the serrated edge can be factory installed on a new plow blade for as little as $43.95. Both styles are designed to be welded on, and require fitting and welding with either a MIG or SMAW (stick) welding machine.

Blade Toe Options and Parts
Blade Toe Options and Parts
Here you can select from a range of reamer tip options for your existing blade toe bushing, or choose blade toe parts that you can weld on yourself.
Blade Mounting Pins
Blade Mounting Pins
Here you can find blade mounting pins for Burkeen, Case, Ditch Witch and Vermeer plows. You can also find replacement blade shims for our plow blades that allow mounting options below the blade mounting plate.